Flooring
ASSIGNMENT
ON
SPECIFICATION
SUBMITTED BY
PRAVIN KUMAR JHA (221071)
SOURABH JOSHI (221074)
GOVIND MALANI (221094)
ACM 22 – SECTION II
NATIONAL INSTITUTE OF CONSTRUCTION
MANAGEMENT AND RESEARCH
Flooring (Ceramic/Marbonite)
Brief Specification:
Providing and laying polished marbonite floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.05% and conforming to ISO: 13006 /N176 Grp. BIa., of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
Detailed Specification:
Scope:
The work covered under this specification consists of providing and laying at all levels and floors ceramic tiles in flooring, skirting and dado in accordance with these specifications and relevant drawings.
Applicable codes and specifications:
|No. |I.S. No. |I.S. Particulars |
|1. |I.S. 777 |Specification glazed earthen ware wall tiles. |
|2. |I.S. 1200 (Part-XI) |Method of measurement building and civil engineering works. |
|3. |I.S. 13753 |Specification glazed earthen ware wall tiles. |
|4. |I.S. 13754 |Specification glazed earthen ware wall tiles. |
|5. |I.S. 13755 |Specification glazed earthen ware wall tiles. |
|6. |I.S. 13756 |Specification glazed earthen ware wall tiles. |
The relevant I.S. specifications, standards and codes given below are...
View Full Essay